|
SaschaJ0815
Germany
2 Posts |
 Posted - Feb 11 2025 : 18:23:10
|
Hi,
I`m realy not sure what I have done wrong. I have made a very simpel
sturcktur for testing fasthenry, but I get no results.
Basically I was done the same linke in one of the basic tutorial.
Here are the input file
* FastHenry input file created using FreeCAD's ElectroMagnetic Workbench
* See ht*p://w*w.freecad.org, ht*p://w*w.fastfieldsolvers.com and ht*p://epc-co.com
.units mm
.default sigma=58000.0 nhinc=5 nwinc=5 rh=2 rw=2
* Nodes
NFHNode x=0.0 y=0.0 z=0.0
NFHNode001 x=10.0 y=0.0 z=0.0
NFHNode002 x=10.0 y=0.0 z=0.0
NFHNode003 x=10.0 y=10.0 z=0.0
NFHNode004 x=10.0 y=10.0 z=0.0
NFHNode005 x=0.0 y=10.0 z=0.0
NFHNode006 x=0.0 y=10.0 z=0.0
NFHNode007 x=0.0 y=2.0 z=0.0
* Segments
EFHSegment NFHNode NFHNode001 w=1.0 h=1.0
EFHSegment001 NFHNode002 NFHNode003 w=1.0 h=1.0
EFHSegment002 NFHNode004 NFHNode005 w=1.0 h=1.0
EFHSegment003 NFHNode006 NFHNode007 w=1.0 h=1.0
* Ports
.external NFHNode NFHNode007
.freq fmin=1.0 fmax=1000000000.0 ndec=1.0
.end
I was use FreeCad 1.0 for generated it.
I also try to do some more complex structur to analyze, but this was
also not work. I also try to use VoxHenry with FreeCad 1.0 but this
was also not work.
Maybe You can help me.
Best regards
Sascha
|
|
some very basic Problems
