Hello, When I use FastHenry to caculate the inductance,I get a problem that the result of FastHenry's window is not the same as the output file Zc.mat.
EX:
The following is FastHenry input file
* FastHenry input file created using FreeCAD's ElectroMagnetic Workbench * See ht*p://w*w.freecad.org, ht*p://w*w.fastfieldsolvers.com and ht*p://epc-co.com .units mm .default sigma=58000.0 nhinc=1 nwinc=1 rh=2 rw=2 * Nodes NFHNode0 x=0 y=0.0 z=0.0 NFHNode1 x=0 y=100.000000 z=0.0
Times: Read geometry 0.134 Multipole setup 0.298 Scanning graph 0.033 Form A M and Z 0.052 form M'ZM 0 Form precond 0.0349998 GMRES time 0.549 Total: 1.101 /////////////////////////////////////////////////////
The following is the content in Zc.mat
Row 3: nfhnode4 to nfhnode5 Row 2: nfhnode2 to nfhnode3 Row 1: nfhnode0 to nfhnode1 Impedance matrix for frequency = 1 3 x 3 0.0431034 +8.43692e-07j -1.85793e-26 +5.41399e-07j -1.29247e-26 +4.55543e-07j -1.37325e-26 +5.41399e-07j 0.0431034 +8.43692e-07j -8.07794e-27 +5.41399e-07j -1.45403e-26 +4.55543e-07j -6.46235e-27 +5.41399e-07j 0.0431034 +8.43692e-07j /////////////////////////////////////////////////