Hi, I have the following Fast Henry file, but the results are all nan in the Zc.mat file. I cannot figure out why this is the case. I would love some ideas. Thanks in advance.
.units m
.default sigma=58000000.0 nhinc=1 nwinc=1 rh=2 rw=2
Nw1 x=0 y=0 z = 0.03
Nw2 x=0 y=0 z = -0.03
EWire Nw1 Nw2 w=2e-3 h=2e-3
.external Nw1 Nw2
Nbar001 x=0.012 y= 0.0 z= 0
Nbar002 x=0.068 y= 0.0 z= 0
Nbone001 x=0.012 y=0.0 z=0.012035
Nbone002 x=0.037200000000000004 y=0.0 z=0.012035
Ebone00 Nbone001 Nbone002 w=0.001 h=3.5e-05
Nbone011 x=0.03800000000000001 y=-0.20935573443522382 z=0.012035
Nbone012 x=0.038 y=-0.04699822609770328 z=0.012035
Ebone01 Nbone011 Nbone012 w=0.001 h=3.5e-05
Nbone021 x=0.043800000000000006 y=1.0727905960530816e-17 z=0.012035
Nbone022 x=0.069 y=1.6900125828233477e-17 z=0.012035
Ebone02 Nbone021 Nbone022 w=0.001 h=3.5e-05
Nbone031 x=0.037200000000000004 y=0.0 z=0.012035
Nbone032 x=0.03800000000000001 y=-0.20935573443522382 z=0.012035
Ebone03 Nbone031 Nbone032 w=0.001 h=3.5e-05
Nbone041 x=0.038 y=-0.04699822609770328 z=0.012035
Nbone042 x=0.043800000000000006 y=1.0727905960530816e-17 z=0.012035
Ebone04 Nbone041 Nbone042 w=0.001 h=3.5e-05
.equiv Nbone002 Nbonebone031
.equiv Nbone032 Nbonebone011
.equiv Nbone012 Nbonebone041
.equiv Nbone042 Nbonebone021
.external Nbone001 Nbone022
EVa0 Nbar001 Nbone001 w=0.0001 h=0.0001
.external Nbar001 Nbone001
EVb0 Nbar002 Nbone022 w=0.0001 h=0.0001
.external Nbar002 Nbone022
.freq fmin=10.0 fmax=1000000000.0 ndec=1.0
.end
