| T O P I C R E V I E W |
| mhmprivacy |
Posted - Sep 02 2010 : 09:46:09
Hi everybody,
I recently got into Fastcap to solve an interconnect problem.
I am working on bent wire issue & wanna extract capacitances of a bent configuration.
Please let me know if it is possible or not.
And, I really need help to generate an input file. I have no idea about the commands. I have seen some, such as "q","g" and "t" but I cant use them to define a geometry. What is the PATRAN? Is it actually another software for modeling? Or just an architecture? Is it necessary to make a lst file? If so, then what the method is?
I really appreciate those who address my essential questions.
Upward and onward.
MHM |
| 2 L A T E S T R E P L I E S (Newest First) |
| Enrico |
Posted - Sep 13 2010 : 18:02:36
Have you checked the 'Demo' page (link on the left menu frame of the web page)?
You should also read the User's Manual, after following the demo
Enrico
|
| mhmprivacy |
Posted - Sep 04 2010 : 12:36:16
Hi again,
By the way of example, How can I deal with the commands below to define a conductor?
Q line1 0.0 0.0 0.0 0.6 0.0 0.0 0.6 0.45 0.0 0.0 0.45 0.0
Q line1 0.0 0.0 0.0 0.0 0.45 0.0 0.0 0.45 1000.0 0.0 0.0 1000.0
Q line1 0.0 0.45 0.0 0.6 0.45 0.0 0.6 0.45 1000.0 0.0 0.45 1000.0
Q line1 0.0 0.0 0.0 0.6 0.0 0.0 0.6 0.0 1000.0 0.0 0.0 1000.0
Q line1 0.6 0.0 0.0 0.6 0.45 0.0 0.6 0.45 1000.0 0.6 0.0 1000.0
Q line1 0.0 0.0 1000.0 0.0 0.45 1000.0 0.6 0.45 1000.0 0.6 0.0 1000.0
What are the numbers? What do they mean?
|
|
|
