| T O P I C R E V I E W |
| akio masaki |
Posted - Feb 12 2010 : 06:51:58
Hello my name is akio masaki.
I am trying to enter from PATRN neutral file to fastcap2.
But in the fastcap output window I see "the assign name:no conductor name specified."Where should I define conductor name in PATRN or Fastcap? I cannot find name comand in PATRAN.
Graphic window is none show. I created geometry simple two plate(1mmx1mm, distance0.5mm)I meshed each plate 25 quad4 ,total 50 quad4.
I exported this meshed file to fastcap2 with PATRN2 NEUTRAL FILE format.
Please help me.
Fastcap comannd window is follows.
25 0 0 1 0 0 0 0 0
P3/PATRAN Neutral File from: C:.db
26 0 0 1 72 50 0 0 -1
12-Feb-10 14:12:27 3.0
31 1 0 1 0 0 0 0 0
0.000000000E+0 0.000000000E+0 0.000000000E+0
31 2 0 1 0 0 0 0 0
0.000000000E+0 1.000000000E+0 0.000000000E+0
31 3 0 1 0 0 0 0 0
1.000000000E+0 1.000000000E+0 0.000000000E+0
31 4 0 1 0 0 0 0 0
1.000000000E+0 0.000000000E+0 0.000000000E+0
31 5 0 1 0 0 0 0 0
0.000000000E+0 0.000000000E+0 5.000000000E-1
31 6 0 1 0 0 0 0 0
0.000000000E+0 1.000000000E+0 5.000000000E-1
31 7 0 1 0 0 0 0 0
1.000000000E+0 1.000000000E+0 5.000000000E-1
31 8 0 1 0 0 0 0 0
1.000000000E+0 0.000000000E+0 5.000000000E-1
99 0 0 1 0 0 0 0 0
Fastcap output window is follows.
FastCap, (c) by M.I.T.
Windows porting and modifications, version 3.32
(c) 1998, 2008 by Enrico Di Lorenzo, w*w.fastfieldsolvers.com
Running fastcap 2.0 (18Sep92)
Input: C:\Program Files\FastFieldSolvers\FastCap2\Samples\Input_files\E2K-X15\shield1.out1
No title line beginning with '0' found, assuming PATRAN input file
zero element request in file `C:\Documenti\Codice\FastSolvers\FastCap331_071231\fastcap\patran.c' at line 121
assign_names: no conductor names specified
|
|
|
