| T O P I C R E V I E W |
| ngarg86 |
Posted - Jul 24 2007 : 15:51:17
Geometrically where exactly do the outer and inner permittivities lay. I am making two conductors a little above a big dielectric interface and want the air dielectric to be 1 and the dielectric interface to have a dielectric constant of 10.
Here is what I have:
C Small_Left_t.0002_.00005.qui 1.0 0.0 0.0 0
C Small_Right_t.0002_.00005.qui 1.0 0.0 0.0 0.0
D Big.qui 1 10 0.0 0.0 0 0.0 0.0 0
I thought that was correct according to my conditions, but after making changes to the dielectric constants I am not getting the changes that I should see.
Nidhi Garg |
| 3 L A T E S T R E P L I E S (Newest First) |
| xinranw |
Posted - Sep 11 2007 : 07:19:58
I have similar questions, could anyone please answer this question?
Thanks,
Xinran |
| ngarg86 |
Posted - Aug 01 2007 : 20:13:46
Please Help
Nidhi Garg |
| ngarg86 |
Posted - Jul 25 2007 : 15:16:34
This is mainly for the dielectric interfaces.
quote:
Originally posted by ngarg86
Geometrically where exactly do the outer and inner permittivities lay. I am making two conductors a little above a big dielectric interface and want the air dielectric to be 1 and the dielectric interface to have a dielectric constant of 10.
Here is what I have:
C Small_Left_t.0002_.00005.qui 1.0 0.0 0.0 0
C Small_Right_t.0002_.00005.qui 1.0 0.0 0.0 0.0
D Big.qui 1 10 0.0 0.0 0 0.0 0.0 0
I thought that was correct according to my conditions, but after making changes to the dielectric constants I am not getting the changes that I should see.
Nidhi Garg
Nidhi Garg |
